Yinli ordinary lathe automatically processes the processed parts according to the pre programmed processing program. We write the machining process route, process parameters, tool motion trajectory, displacement, cutting parameters, and auxiliary functions of the parts into a machining program sheet according to the instruction code and program format specified by the CNC machine tool. Then, we record the contents of this program sheet on the control medium and input it into the device of the Yinli ordinary lathe to command the machine tool to process the parts.

　　Engaged in maintenance personnel, able to perform maintenance, installation, and commissioning based on technical data; Use necessary maintenance tools to inspect and analyze the fault phenomena of CNC machine tools, confirm the cause of the fault, and complete the maintenance and repair of CNC machine tools. What are the basic requirements for maintenance?

　　1、 As a maintenance personnel of Yinli ordinary lathe, one should not only focus on analysis and accumulation, but also be diligent and good at learning.

　　2、 Due to its broad knowledge base, the Yinli ordinary lathe is usually a processing equipment that integrates mechanical, electrical, hydraulic, pneumatic and other functions. The various parts that make up the machine tool are closely related, and any failure in one part will affect the normal operation of other parts.

　　3、 Having strong hands-on ability is a quality possessed by maintenance personnel. But for the maintenance of such precision and critical equipment, there is a clear purpose, complete thinking, and meticulous operation.

　　4、 Skilled in thinking about complex structures and close connections between various parts. The fault involves a wide range of aspects. And in some cases, the phenomenon reflected by the malfunction may not necessarily be the root cause of the malfunction.

　　5、 The ability to proficiently operate machine tools and use maintenance instruments for silver power ordinary lathes cannot be achieved without practical operation, especially during the maintenance process. Maintenance personnel usually need to enter special operation modes that ordinary operators cannot perform, such as parameter setting and adjustment through computer and software online debugging, and monitoring with PLC programmers.